Lê Huy Lâm ( Mr )
[Sales engineer]
[Cellphone]: 0915.493.164 – 0915.031.817
[Email]: sale10@tmpvietnam.com
[Zalo]: 0163.2844.226
Hiện nay chúng tôi đang là nhà phân phối và đại lý của nhiều hãng lớn trên toàn thế giới với đầy đủ các trang thiết bị máy móc, quý khách có thể tham khảo thêm:
AT2E, As scholer, Ametek PI, Ametek test, Bircher, Barksdale, Beckhoff, Busmann, Baumuller, Baumer, Elau, Elettrotek Kabel, IBA, Kern Sohn, Keller, Kiepe, Mark 10, Matsushima, Matsui, Masibus, Maxonic, Mehrer, Nireco, Pilz, Pora, Pentair, Redlion, Rotork, Soldo, Teclock, TDK Lambda, Telco Sensors, Yokogawa, Wise, Wago, Wittenstein, Asa – RT, Aviteq, Bihl wiedemann, Brevini, Conatec, Gemu, Kyowa, Mdexx, Megatron, Meinsberg, Microsonic, Meinsberg, Microsonic, MKS Anlasser, Novotechnik, PMA, PS electric, Schiebel, Singerland Bremsen, Spohn Burkhardt, Sytstec, STI Vibration Monitoring, Tematec, Van Der Graaf, Vaccum Barrier,…
[Sales engineer]
[Cellphone]: 0915.493.164 – 0915.031.817
[Email]: sale10@tmpvietnam.com
[Zalo]: 0163.2844.226
Service intendedDiaphragm seal type gauges are suitable for the situation where the process medium would corrode the instrument connection and pressure sensing element. Furthermore, this type of gauge is highly recommended in a situation where the process medium contains suspended solids, or if it is sufficiently viscous to clog the instrument connection and pressure sensing element. Additionally, it is recommended to be used where the process medium might freeze or solidify the instrument connection and pressure sending element due to the ambient or process temperature change, and where the process medium requires the flushing from the system to prevent any contamination.
| Design | Internal diaphragm |
| Accuracy | Refer to gauge model |
| Suitable pressure range (MPa, kPa, bar) | -0.1 ~ 0 to -0.1 ~ 2.5 MPa 0 ~ 0.1 to 0 ~ 35 MPa |
| Filling liquid | Silicone oil |
| Working temperature | Ambient : -20 ~ 65 °C Fluid : Max. 100 °C |
| Diaphragm material | Diaphragms are available in many corrosion resistant materials. Compatibility of selected material and process fluid is the responsibility of user. |
| Temperature effect | Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.5 % per 10 ℃ of full scale |
Standard features
| Process connection | Model P710 : PT, NPT and others feasible Model P720, P730 : Flanges to ANSI, JIS or other standard |
| Upper flange (Gauge side) | Stainless steel (304SS, 316SS, Titanium) |
| Diaphragm | 316L SS, Monel, Hastelloy-C Titanium, Tantalum, Nickel, Alloy20 |
| Under flange (Process side) | Stainless steel (304SS, 304L SS, 316SS, 316L SS) Monel, Hastelloy-C, Titanium, Nickel |
| Certificates | ATEX Ex II GD c IIC TX |
| Option | ■ Diaphragm and under flange are available in PTFE coating or PTFE lining (★See note) ■ Under flange (Process side) are available in purging plug or heating/cooling jacket |
Hiện nay chúng tôi đang là nhà phân phối và đại lý của nhiều hãng lớn trên toàn thế giới với đầy đủ các trang thiết bị máy móc, quý khách có thể tham khảo thêm:
AT2E, As scholer, Ametek PI, Ametek test, Bircher, Barksdale, Beckhoff, Busmann, Baumuller, Baumer, Elau, Elettrotek Kabel, IBA, Kern Sohn, Keller, Kiepe, Mark 10, Matsushima, Matsui, Masibus, Maxonic, Mehrer, Nireco, Pilz, Pora, Pentair, Redlion, Rotork, Soldo, Teclock, TDK Lambda, Telco Sensors, Yokogawa, Wise, Wago, Wittenstein, Asa – RT, Aviteq, Bihl wiedemann, Brevini, Conatec, Gemu, Kyowa, Mdexx, Megatron, Meinsberg, Microsonic, Meinsberg, Microsonic, MKS Anlasser, Novotechnik, PMA, PS electric, Schiebel, Singerland Bremsen, Spohn Burkhardt, Sytstec, STI Vibration Monitoring, Tematec, Van Der Graaf, Vaccum Barrier,…
Nhận xét
Đăng nhận xét