Pressure gauge p751, p752, p753, p754, p755, p756 wise vietnam

Lê Huy Lâm ( Mr )
[Sales engineer]
[Cellphone]: 0915.493.164 – 0915.031.817
[Email]: sale10@tmpvietnam.com
[Zalo]: 0163.2844.226
P751 đến 756
Service intended
P750 series have diaphragm seal to be combined with a pressure gauge. These series are suitable to be used for the situation where corrosive, contaminated, hot, and viscous pressure mediums are present, and it could be used for a chemical, food, beverage, biochemical, and pharmaceutical industry.
Nominal diameter63, 80 and 100 mm
Accuracy63 and 80 mm : ±1.6 % of full scale
100 mm : ±1.0 % of full scale
Pressure range (MPa, kPa, bar)Steady : 75 % of full scale (63 and 80 mm)
             100 % of full scale (100 mm)
Over range protection : 130 % of full scale
Working pressureSteady : 75 % of full scale
Over range protection : 130 % of full scale
Working temperatureAmbient : -20 ~ 65 °C
Fluid : Max. 121 °C
Temperature effectAccuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately
±0.5 % per 10 ℃ of full scale
Standard features
Process connection316SS
P751 : 1½" and 2" Nut
P752 : 1", 1½", 2", clamp connection
P753 : PF¾", PF1", PF1½", male screw
P754 : Standard and non standard flange
P755 : Homogenizer
P756 : Homogenizer flange (95 x 43 x 28 mm)
BodyStainless steel (316SS)
DiaphragmStainless steel (316L SS)
Electropolished diaphragm
Ra 12 ~ 20 ㎛
System fillingFood grade oil (FDA certified)
CertificatesATEX Ex II GD c IIC TX
Hiện nay chúng tôi đang là nhà phân phối và đại lý của nhiều hãng lớn trên toàn thế giới với đầy đủ các trang thiết bị máy móc, quý khách có thể tham khảo thêm:

Nhận xét